CPBA 7.X Dumps

QUESTION NO : 1

When writing specifications in Pega 7, which of the following would ensure they are clear and concise? (Choose two)

A. Use language that describes how the specification should be implemented to achieve the optimum solution.

B. Use unambiguous language to avoid misinterpretation.

C. Describe what the application should do or allow, rather than what it shouldn’t.

D. Describe what the application should do or allow, as well as what it shouldn’t.

Answer: A,C

QUESTION NO: 2

Select two statements that are most true of specifications? (Choose two)

A. They are defined for a case type, and should be as small and granular as possible.

B. They cannot be added once application development begins.

C. They define how application developers plan to satisfy application requirement.

D. They cannot change once application development begins.

Answer: B,C

QUESTION NO: 3

Select three ways that correspondence can be generated from a work item during a flow. (Choose three)

A. Whenoperator processes an assignment by choosing the local action called SendCorrespondence

B. When a work item reaches a correspondence shape

C. When the work item reachestheEnd shape

D. When the work item reaches an assignment with a notification configured

E. When a work item reaches an integration shape

F. When the work item reaches a SendEmail smart shape

Answer: B,D,F

QUESTION NO: 4

A Work Party used for notification purposes typically contains information about a (an)  .

A. Organization Unit

B. Division

C. Work Group

D. Person

Answer: C

QUESTION NO: 5

The Report Editor does NOT allow us to perform which of the following tasks? (Choose two.)

A. Specify drill-down reports

B. Add a filter

C. Copy a report

D. Control the volume of report data

Answer: A,B

QUESTION NO: 6

The Report Editor allows us to configure which type of rule?

A. Categorized Report

B. Report Definition

C. Summary Definition

D. List Report

Answer: B

QUESTION NO: 7

Which statement best describes how to add a report to a report category?

A. Create a shortcut to the reportin the desired category.

B. Reports cannot be added to a category.

C. Reports are automatically added to the appropriate category.

D. Copy the report to the appropriate ruleset.

Answer: C

QUESTION NO: 8

A new work status value is defined using a field value rule for which Pega 7 property?

A. pyStatusWork

B. pyCaseStatus

C. pxCaseStatus

D. pyWorkstatus

Answer: D

QUESTION NO: 9

A data model consists of all of the following except  .

A. Object relationships

B. Data validation

C. Data objects

D. Data types

E. Attributes

Answer: E

QUESTION NO: 10

When developing the initial entity relationship diagram, it is not necessary to document standard case data such as  ,  , and  as Pega 7 automatically creates and updates these data elements for us. (Choose three.)

A. case resolution due data

B. case creation date

C. unique case ID

D. current case status

E. case creation reason

Answer: A,C,D

QUESTION NO: 11

Examine the screenshot below for Validate rule A which is referenced in a flow action named CollectInfo:

What will happen when the user submits CollectInfo?

A. Validate rule A is executed if certain conditions are true, otherwise Validate rule B is executed

B. Validate rule A is overridden by Validate rule B

C. Validate rule A is executed, followed by Validate rule B

D. Validate rule B is executed only if Validate rule A fails

Answer: C

QUESTION NO: 12

Which statements about the following case are true? (Choose two.)

A. Stage 1 is a resolution stage.

B. Stage 1 automatically transitions to Stage 2.

C. Stage 2 is a resolution stage.

D. Stage 1 is a primary stage.

E. Stage 2 is an alternate stage.

Answer: B,D

QUESTION NO: 13

Which flow shape is used to start a subflow from a main flow, and waits until the subflow completes before the main flow continues?

A. ShapeA

B. Shape B

C. Shape C

D. Shape D

Answer: D

QUESTION NO: 14

Which of the following shapes could be used to send a notification to a user? (Choose two.)

A. ShapeA

B. Shape B

C. Shape C

D. Shape D

Answer: A

QUESTION NO: 15

(True/False) A single flow can contain multiple End shapes.

A. True

B. False

Answer: A

QUESTION NO: 16

During a DCO session, flows, connectors, and flow shapes are linked to the corresponding

 
A. requirement

B. case type

C. business objective

D. specification

Answer: C

QUESTION NO: 17

How does an application determine the default action for a user at an assignment?

A. The connector flow action with the greatest likelihood value is the default action.

B. The flow action that is associated with the “Default” connector type in the flow is the default action.

C. The connector or local flow action with the greatest likelihood value is the default action.

D. The connector or local flow action that appears first when listed alphabetically is the default action.

Answer: D

QUESTION NO: 18

Which of the following is not a good example of a process improvement?

A. Automate a decision to determine whether or not an auto insurance claim represents a total loss.

B. Automatically route an assignment to a workbasket to allow the first-available claims adjuster to work on each claim.

C. Reduce a process to under 15 steps by combining three steps performed by two different people into one assignment.

D. Add a service level to an assignment to ensure that an adjuster reviews each claim and sets up and appointment within three days.

Answer: C

QUESTION NO: 19

Which statement best describes the difference between a local flow action and a connector flow action?

A. A local flow action can be configured for a decision rule, while a connector flow action cannot

B. A local flow action can be reused within a flow rule, while a connector flow action cannot

C. A connector flow action can be reused within a flow rule, while a local flow action cannot

D. A connector flow action completes an assignment, while a local flow action does not

Answer: B

QUESTION NO: 20

How many shapes should a flow rule be limited to?

A. Ten (10)

B. Twenty (20)

C. Fifteen (15)

D. Five (5)

Answer: C

QUESTION NO: 21

Which of the following flow shapes should be used to route a work item?

  Pegasystems PEGACPBA71V1 Exam

A. Router

B. Utility

C. Decision

D. Assignment

Answer: D

QUESTION NO: 22

Which statements about the following case are true? (Choose two)

A. Stage 2 is an alternate stage.

B. Stage 2 is a resolution stage.

C. Stage 1 automatically transitions to Stage 2.

D. Stage 1 is a resolution stage.

E. Stage 1 is a primary stage.

Answer: B,C

QUESTION NO: 23

When implementing a business process as a Pega case type, which of the following would indicate a boundary between case stages?

A. The case reaches a specific milestone

B. The case has been resolved

C. The case changes ownership

D. A subcase needs to be created

Answer: A

QUESTION NO: 24

When designing a case, it is recommended that each stage be decomposed into no more than

  steps.

  Pegasystems PEGACPBA71V1 Exam

A. 5 to 9

B. 6 to 10

C. 10 to 15

D. 15

Answer: C

QUESTION NO: 25

Tom Jones’ request for a credit card dispute is an example of which of the following?

A. A service

B. A case type

C. A case

D. A task

Answer: B

QUESTION NO: 26

The maximum number of stages in a case should be  .

A. 15

B. 7

C. 5 ± 2

D. 7 ± 2

Answer: D

QUESTION NO: 27

A case stage can be  . (Choose two.)

A. skipped, based on the result from a decision table

B. entered only if all validation requirements are met

C. exited only when all subcases are resolved

D. skipped, based on a specified condition

Answer: B,D

QUESTION NO: 28

(True/False) Alternate stages automatically execute in sequential order.

A. True

B. False

Answer: B

QUESTION NO: 29

Case type A requires a manual series of steps be taken when an instance of A is rejected. Select the best approach to model this requirement in the case design.

A. Add an optional process on a primary stage to handle the rejection process by instantiating a new case type, B.

B. Add an optional action on a primary stage of case type A to handle the rejection process.

C. Add an alternate stage to the case type A to handle the rejection process.

D. Add an optional process on an alternate stage to handle the rejection process.

Answer: C

QUESTION NO: 30

When defining a new case type, the best course of action is to:

A. Identify steps and their processes, then add stages to reference the steps

B. Identify processes, then steps, and then stages

C. Identify stages, then add steps, and then define processes

D. Identify processes, then add stages, and then add steps

Answer: D

QUESTION NO: 31

Civen this high-level view of a health assessment process:

- the patient is triaged by the receiving nurse and vital statistics are entered in the patient log

- the patient log and the patient are reviewed by the attending physician

- ifnecessary, additional tests are ordered

- thediagnosis and treatment plan are established

Which step should be implemented as a subcase?

A. If necessary, additional tests are ordered

B. thediagnosis and treatment plan are established

C. the patient log and the patient are reviewed by the attending physician

D. the patient is triaged by the receiving nurse and vital statistics are entered in the patient log

Answer: B

QUESTION NO: 32

Which explorers can be used to view properties for a data object in your application? (Choose two.)

A. Case Explorer

B. Data Explorer

C. Records Explorer

D. Application Explorer

Answer: A,D

QUESTION NO: 33

When completing a new rule form, the “Apply To” field represents what?

A. The version of the rule

B. The ruleset the rule applies to

C. The other rules the new rule will apply to

D. The rules context, or scope, for the purpose of inheritance

Answer: D

QUESTION NO: 34

In a Pega application, a case type corresponds to which construct?

A. An application

B. A class

C. An implementation

D. A ruleset

Answer: C

QUESTION NO: 35

Which of the following rule types should NOT be left under control of the business in production (based on Pega’s Build for Change ® philosophy)? (Choose two)

A. Decision Table

B. Property Type

C. Service Level

D. Data Transform

Answer: C,D

QUESTION NO: 36

Which of the following is a Best Practice when efficiently building a Pega application?

A. Create custom HTML code for a section

B. Reuse rules when updating an application

C. Create a property to control the status of work

D. Add custom buttons to a section

Answer: A

QUESTION NO: 37

One application development guardrail limits the number of shapes (excluding connectors) in a flow rule. Why should a flow rule obeys this limit?

A. Flows with too many shapes cannot be updated

B. Flows with too many shapes cannot be saved

C. Limiting the number of shapes allows developers and end users to more easily understand the process

D. Adding too many shapes in one flow rule may result in performance issues

Answer: C

QUESTION NO: 38

Review the following decision table.

If the credit score is 800 and the outstanding balance is 1000, what is the result of the decision?

A. Level3

B. Level1

C. Reject

D. Level2

Answer: D

QUESTION NO: 39

(True/False) A new Pega 7 application can be built on top of an already existing Pega 7 application.

A. True

B. False

Answer: A

QUESTION NO: 40

The Pega Business Architect’s main focus is on which of the following? (Choose three)

A. Business value assessment

B. Communications with project sponsors and stakeholders

C. Rule re-usability

D. Design integrations with external applications

E. Portal design and implementation

F. Business benefits

Answer: A,C,E

QUESTION NO: 41

An experienced Pega business architect can apply their expertise  .

A. throughout the entire development life cycle

B. during the analytical modeling phase only

C. during the executable modeling phase only

D. during the descriptive modeling phase only

Answer: C

QUESTION NO: 42

Review the following Decision Table.

If the credit score is 700 and the outstanding balance is 1500, which value will be returned?

A. Level2

B. Level3

C. Reject

D. Level1

Answer: C

QUESTION NO: 43

Given the following scenario for property insurance claims, which type of decision rule should be used to configure the decision?

After a property insurance claim has been filed, any claim that involves flood damage must be reviewed by a flood claim specialist before being sent to a claims adjuster. All other property insurance claims can be sent to the claims adjuster without this step.

A. When

B. Constraints

C. Decision Table

D. declare Expressions

Answer: B

QUESTION NO: 44

Review the following Decision Table.

What is the expected result for an auto claim type, with a value of 3700, which involves 4 parties? Assume that evaluation stops upon encountering the first correct result.

A. None of the allowed results can be reached as the decision table contains unreachable rows

B. Approve

C. Escalate

D. Reject

Answer: C

QUESTION NO: 45

Section rules may be referenced by which flow shape?

A. Assignment

B. Connector

C. None

D. Decision

Answer: D

QUESTION NO: 46

What does the basic Text Area (pxTextArea) control do?

A. Presents the property as a multi-line HTML text field, which provides an input or ‘read-only’ display area for a large amount of text

B. Presents the property as a multi-line HTML text field, which provides a presentationof text that is always a ‘read-only’ display

C. Presents the property as a single-line HTML text field, which provides an input or display area for text

D. Presents the property as a multi-line HTML text field, which provides an input area for a large amount of text. Cannot be marked as ‘read-only’

Answer: A

QUESTION NO: 47

Which tool allows us to preview and reuse configured, working UI examples?

A. UI Gallery

B. Rules Inspector

C. UI Inspector

D. UI Wizard

Answer: B

QUESTION NO: 48

Section rules can be nested (referenced) in  .

A. Harnesses, Flow Actions, and Sections

B. Harnesses and Flow Actions only

C. Flow Actions and Sections only

D. Any UI rule type

Answer: D

QUESTION NO: 49

A user must select one color from a list of four allowed choices: Red, Green, Blue, and Black. Which standard control could be used to create a selectable list for this property? (Choose two.)

A. Check box

B. Text box

C. Drop down

D. Radio buttons

Answer: C,D

QUESTION NO: 50

Which statement best describes the behavior observed when running a flow in draft mode?

A. Flows can be saved even if rules have not been configured for flow shapes

B. UI fields marked as required can be skipped when running the flow

C. Service levels are ignored when running the flow

D. Decision outcomes are chosen by the user if the decision rule cannot be found

Answer: C

QUESTION NO: 51

Which of the following is a best practice for more effective User Interface (UI) and Flow elaboration and drafting sessions?

A. Elaborate upon the draft UI first, then flow drafts

  Pegasystems PEGACPBA71V1 Exam

B. Elaborate upon draft flows first, then draft the UI

C. Elaborate upon draft flows and UI simultaneously

D. Elaborate whichever one is more complex first

Answer: D

QUESTION NO: 52

Which of the following are used to organize the contents of a section.

A. Rows

B. Controls

C. Cells

D. Layouts

Answer: B

QUESTION NO: 53

A flow action typically references a  .

A. Section

B. Cell

C. Layout

D. Harness

Answer: C

QUESTION NO: 54

A  displays the overall form for viewing a work item.

A. Flow Action

B. Harness

C. Section

D. Layout

Answer: D

QUESTION NO: 55

In Designer Studio, the Application Explorer displays  .

A. the data structure only

B. the class tree and rules organized by the classes they apply to

C. all the rules used by all applications

D. the class structure only

Answer: C

QUESTION NO: 56

What can the application menu in the Designer Studio be used for?

A. To open the application view in a new window

B. To switch between application and design modes

C. To switch to a different application

D. To document applications

Answer: D

QUESTION NO: 57

In the “Situational Layer Cake” where are the common modules more likely to be found?

A. Lower layers

B. Any layer

C. Higher layers

D. Middle layers

Answer: B

QUESTION NO: 58

Key Performance Indicators (KPIs) are used to  .

A. determine whether an application has satisfied all of its requirements

B. determine if an application has met all of its business objectives

C. verify whether end users are satisfied with the application

D. determine whether or not an application has implemented all of its specifications

Answer: D

QUESTION NO: 59

Rulesets are primarily used  . (Choose two.)

A. to support the creation ofmultiple versions of rules in an application

B. to facilitate the migration of rules from one system to another

C. to specify the reusability of a rule

D. to define and configure an application

Answer: B,D

QUESTION NO: 60

Which of the following are NOT declarative rule types? (Choose two.)

A. Constraints

B. Declare Activities

C. Declare Validate

D. Declare Expressions

Answer: A,B

QUESTION NO: 61

A  rule allows us to set a property value automatically, whenever an input value changes.

A. Declarative Network

B. Declare Expressions

C. Property

D. Data Transform

Answer: D

QUESTION NO: 62

An application references the property .Customer.Address(Billing).State. What is the property mode for .Address(Billing)?

A. Page

B. Page Group

C. Page List

D. Single Value

Answer: C

QUESTION NO: 63

Which statement best describes how a service level affects the urgency value of an assignment or a case?

A. If the current urgency value is less than the urgency specified inthe milestone, it is adjusted tothe urgency value specified in that milestone – otherwise, it remains the same.

B. When a given milestone is reached, the urgency is set to the specified value in that milestone.

C. When a given milestone is reached, the current urgency is checked. If it is greater than the value specified in that milestone, the assignment or case moves to the next milestone

D. When a given milestone is reached, the specified urgency is added to the current urgency value.

Answer: D

QUESTION NO: 64

Roger receives an assignment during business hours on Tuesday, the 14th. The assignment is governed by the following service level.

Assuming a Monday-Friday, 5-day work-week with no holidays or time off, determine the day on which the urgency adjustment caused by the service level will reach 70.

A. Thursday, the 23rd

B. Friday, the 17th

C. Monday, the 20th

D. Wednesday, the 22nd

Answer: B

QUESTION NO: 65

After 14 hours, the following Service Level rule will adjust the assignment urgency to what value?

A. 75

B. 55

C. 45

D. 85

Answer: C

QUESTION NO: 66

Verifiability of a requirement means the requirement  .

A. must include information that establishes a testable condition

B. clearly defines all the information necessary to describe the feature or behaviordesired

C. must be well documentedand concise

D. has been agreedupon by both business and IT leadership

Answer: D

QUESTION NO: 67

A requirement defines what an application must do or satisfy to meet one or more  ?

A. Use Cases

B. Objectives

C. Specifications

D. User Stories

Answer: C

QUESTION NO: 68

A fully stated requirement with no missing information is  .

A. current

B. cohesive

C. complete

D. consistent

Answer: B

QUESTION NO: 69

Select the types of documentation that the Application Document wizard can produce. (Choose three)

A. An application profile document

B. An entity relationship document

C. A specification document

D. A requirements document

E. Application documentation

F. A training manual

Answer: A,C,E

QUESTION NO: 70

Central to the success of DCO are? (Choose two.)

A. Clear separation between requirements and specifications

B. Separately manageable artifacts for each stakeholder

C. Central repository for application artifacts

D. Up-to-date and in-sync record of the business need

Answer: C,D

QUESTION NO: 71

One of the key benefits specific to DCO is  .

A. creating test plans from specifications

B. incorporating UI diagrams into specifications

C. the ability to trace rules back to their specifications and requirements

D. importing requirements from an external system

Answer: D

QUESTION NO: 72

The purpose of DCO session is to  . (Choose three)

A. identify opportunities to automate policies

B. confirm an implementation methodology

C. develop draft flows or user interfaces based upon specifications

D. develop test plans for features

E. elaborate a specification

F. add requirements to a central repository

Answer: B,C,F

QUESTION NO: 73

To assign a task to a specific person, Pega 7 sends it to a(n)  . To assign a task to a certain team and allow anyone on that team to perform the task, Pega 7 sends it to a(n)

  Pegasystems PEGACPBA71V1 Exam

A. Workbasket, worklist

B. Assignment, workbasket

C. Assignment, worklist

D. Worklist, assignment

E. Worklist, workbasket

Answer: E