1.
How to get sub report from two different organizations?
2.
How to form a report based on two classes
3.
Which of the following uses Branch feature
a)
Different teams working on the different enhancements in the
same ruleset
4.
There are five instances of the same rule. The only
differences between these are the circumstance settings and ruleset version: Which
is chosen by rule resolution, when the “Country” Clipboard property is“Greece”?
5.
Access manager is used to manage which types of functions.
a)
Access Deny
b)
Specialised access to a particular case
c)
Privilege
d)
Access When to copy an object even though it doesn’t have
access
6.
Questions on Branches
7.
List out the three reasons why operator does not have the
checkout to access a rule?
a)
Ruleset is locked
b)
Checkout feature is not enabled in the ruleset
c)
Operator does not have the privilege to checkout
d)
Someone has been working on the rule by clicking checkout
already
8.
Agent runs for every 600seconds interval and it has a
capacity to process 50 entries but this time there were 75 entries so again
when does the agent runs
a)
Agent runs after 600 seconds after the previous agents has
run
b)
Depend on the node
c)
Runs after an hour after processing 75 entries
d)
9.
Agents runs for every 600s interval. Need to make it run
every morning at 5 AM. How to change the time interval pattern?
a)
Periodic to Recurring
b)
Recurring to Periodic
c)
Once the activity begins, it changes by default
d)
10.
An application needs an update in the patch version which
improves the efficiency & flexibility so which method is used to apply the
required changes
a)
Skimming
b)
Branching
c)
Lock & Roll
11.
Which of the following things have to be done before
archiving a file
a)
Merging all the branches
b)
Locking all the rulesets *
c)
Review the conflicts
d)
Create a product file
12.
There was a service error in the SOAP
a)
Service activity in the Parse XML form
b)
Service activity in the
SOAP Service
form
c)
Mapping activity in the XML form
d)
Mapping activity in the SOAP Service form
13.
There given a real time example. Based on that the question
is as follows. An error message is thrown when a user performs an action in the
PRPC application that calls a rule. What could explain this observation.
(Choose two)
a)
The rule that is chosen by system has an availability of
“Blocked”.
b)
The rule that is chosen by system has an availability of
“Withdrawn”.
c)
The rule that is chosen by the system is in a RuleSet that is
not in the application’s RuleSet stack.
d)
The user does not have appropriate privilege to access the
rule that is chosen by the system
14.
Declare expression is tested using a circumstanced rule. It
is tested using decision tree which is further sources a datapage. So which is
tested first in order to reduce the dependency
a)
Datapage
b)
Declare expression
c)
Circumstanced rule
15.
Question on overriding a circumstance by withdrawing it or by
updating the base rule
16.
Which tool is used for defining decision path in Decision
strategy
a)
Decision tree
b) Switch
c) Set property
d) Filter
17. 2.
MYCo, MyCoINt are of Ruleset Validation where as Inis & InisInt , Customer
are of Application Validation.
MyCoInt & Customer are prerequisites of
MyCo...
options....a) Customer references Inis
b)
MyCoInt references Customer
17.
Matching the definitions of ECS layers with real time
examples
SLA- Imp
ClassGroup- Imp
FlowActions- Framework
1.
Which of the following is true in case of duplicate case
search functionality
a.
Reduced weighted conditions
b.
Increased weighted conditions
c.
Increased threshold
d.
Reduced Threshold
1.
Consider the scenario of Screenflow. Which of the following
is true( a step skips in between)
a.
Enable navigation link for all but only going back for the
last step
b.
3.
1.
When does the property change in copy from date page(Data
model concept)
a.
When the parameter changes
b.
When the data page is referred
Which of
the following statements is least accurate regarding Smart Layouts? (Choose
One)
A. Smart
Layouts are useful in aligning the UI fields
B. Smart
Layout widths can be changed in the branding wizard
C. Smart
Layout widths can be changed in a section rule
D. Smart
Layouts can be converted to free form layouts
Answer: C
Which of
the following performance tools can be used for checking all database queries
that are
executed?
(Choose One)
A. Tracer
B. PAL
C. My
Alerts
D. SMA
Answer: A
Which of
the following statements best describes the purpose of the
Data-Admin-AuthService?
(Choose
One)
A. The
AuthService defines the password requirements
B. The
AuthService defines how PRPC services are authenticated
C. The
AuthService maps a Servlet to the appropriate authentication and timeout
activities
D. The
AuthService is used only when using LDAP authentication
Answer: C
Consider
two classes in an Employee Human Resources application: an “Employee” class,
and a
“TimeOff”
class. The TimeOff class has an “EmployeeID” column that points to records in
the
Employee
class. An “Employees with No TimeOff” report must be created. What is the most
likely
approach?
(Choose One)
A. Create
reports in both classes, and set the TimeOff report as a subreport of the
Employee
report
B. Create
reports in both classes, and set the Employee report as a subreport of the
TimeOff
report
C. Create
a report in the Employee class, with a class join to the TimeOff class
D. Create
a report in the TimeOff class, with a class join to the Employee class
Answer: A
Which of
the following is least likely to impact the runtime experience of a report?
(Choose One)
A.
Disabling Paging
B. Column
Exposure
C.
Changing filter criteria
D.
Including a class join
E. The
order of the columns in the report
Answer: E
From the
report browser, a manager creates a standard report and shared category, and
configures
the report in the shared category. How many rules were created from this
process?
(Choose
One)
A. 0:
Only developers can create rules
B. 1: A
report definition only
C. 2: A
report definition and shortcut
D. 4: A
report definition, category, and 2 shortcuts
Answer: D
Consider
the following inheritance diagram:
When
running a flow for the TimeOff worktype, rules applied to which of the
following classes
cannot be
executed? (Choose One)
A.
@baseclass
B. MyCo-
C.
PegaHRFramework-
D.
MyCo-HR-SelfService-Work-TimeOff
Answer: C
In which
of the following RuleSets is it most appropriate to define connector rules
integrating with
an
Enterprise Service Bus? (Choose One)
A. The
Framework RuleSet (MyCoSelfServiceFW)
B. The
Enterprise Int RuleSet (MyCoInt)
C. The
Framework Int RuleSet (MyCoSelfServiceFWInt)
D. The
Enterprise RuleSet (MyCo)
Answer: B
Mock Test Questions of 7.2 course
APPLICATION
DESIGN
Question
1
Multiple
development teams will be working in the same ruleset. What approach would you
take to enable this requirement?
Use
different branch rulesets.
Use
different ruleset versions.
Use
separate application rulesets for each team.
Use
circumstanced instances of a base ruleset.
Correct!
A ruleset
may have multiple branches to support work on more than one feature or work by
more than one team.
Question
2
An
application includes the following rulesets, with the corresponding validation
modes and prerequisites.
Ruleset
|
Validation
mode
|
Prerequisites
|
MyApp
|
Application
|
N/A
|
MyAppInt
|
Application
|
N/A
|
MyCo
|
Ruleset
|
MyCoInt
|
MyCoInt
|
Ruleset
|
Pega-ProcessCommander
|
Which statement is correct?
Rules
in MyCo can reference rules in MyApp.
Rules
in MyAppInt can reference rules in MyApp.
Rules
in MyCoInt can reference rules in MyCo.
Rules
in Pega-ProcessCommander can reference rules in MyCoInt.
Correct!
MyAppInt
is configured as application validation mode and can reference rules in all
rulesets in the application.
Question
3
An
application rule lists the following application rulesets, in order:
- RulesetA:01-05
- RulesetB:02-03
- RulesetC:01-17-50
There are five instances of a section rule named EnterClaimDetails in the rules cache as shown below:
Applies
to class
|
Ruleset
& version
|
Availability
|
Org-Div-Work
|
RulesetA
: 01-04-02
|
Available
|
Org-Div-Work-FraudClaim
|
RulesetB
: 01-02-01
|
Blocked
|
Org-Div-Work-FraudClaim
|
RulesetC
: 01-17-99
|
Withdrawn
|
Org-Div-Work
|
RulesetB
: 02-02-01
|
Available
|
Org-Div-Work-FraudClaim
|
RulesetC
: 01-09-12
|
Available
|
When a user runs the application, which version of EnterClaimDetails is selected during rule resolution, when processing a fraud claim?
Org-Div-Work-FraudClaim
- RulesetB:01-02-01
Org-Div-Work-FraudClaim
- RulesetC:01-17-99
Org-Div-Work-FraudClaim
- RulesetC:01-09-12
Org-Div-Work
- RulesetB:02-02-01
Org-Div-Work
- RulesetA:01-04-02
Correct!
Because
this instance of the rule is not masked by a blocked or withdrawn rule, and the
applies to class is more specific than Org-Div-Work, this version of EnterClaimDetails
is run.
Question
4
You are
creating the assets for a generalized, reusable application. In which layer of
the Enterprise Class Structure (ECS) do you create the assets?
Framework
layer
Implementation
layer
Division
layer
Pega
Platform layer
Correct!
The
Framework layer contains the assets used to create generalized, reusable
applications.
Question
5
A
requirement states the case must advance to one of three possible stages based
on a known condition. The conditions are subject to change.
Which configuration option provides the most flexibility when configuring the case life cycle?
Which configuration option provides the most flexibility when configuring the case life cycle?
Add
a process to the case life cycle and use a when condition to control the start
of the process.
Add
a process to the case life cycle and use a decision table to identify the
appropriate stage.
Add
a Change Stage smart shape to the case life cycle and use a parameter to
identify the appropriate stage.
Add
an Update Case smart shape to the case life cycle and use a data transform
to identify the appropriate stage.
Correct!
Using a
parameter rather than a stage name to direct the flow in the Change Stage smart
shape provides the most flexibility.
Question
6
You are
updating an application that is comprised of a number of ruleset versions.
How do you copy the highest version of each rule in the different ruleset versions into a higher ruleset version?
How do you copy the highest version of each rule in the different ruleset versions into a higher ruleset version?
Use
the Application Structure landing page to lock the current ruleset versions and
increment the application to a new ruleset version.
Use
the Ruleset Maintenance wizard and skim the rulesets to collect the highest
version of every rule into the new ruleset version.
Use
the Ruleset Maintenance wizard to move the rules from the existing rulesets
into the new ruleset.
Use
the Application rule form to create a branched ruleset, then merge the rulesets
into the new branch.
Correct!
Skimming
creates rules for a major or minor ruleset version by copying selected rules of
lower numbered ruleset versions into a higher ruleset version.
CASE DESIGN
Question
1
A bank
wants to add a qualification process to an account opening case type. In this
qualification process, users select the type of account to open by answering a
set of questions. Once the user selects the type of account to open, the
application advances to a second process to capture identifying information.
Only after the user provides identifying information is the case saved to the
database.
Which configuration option satisfies this requirement?
Which configuration option satisfies this requirement?
Configure
a screen flow as the starting flow for the case.
Instantiate
the case as a temporary case.
Add
a Persist Case shape to the starting flow.
Defer
the case save using the Obj-Save method.
Correct!
Temporary
cases are not written to the database until persisted.
Question
2
To ensure
a case is not a duplicate, the application should present users with a list of
open cases matching either the customer name or the type of inquiry.
Which three configuration options satisfy this requirement? (Choose Three)
Which three configuration options satisfy this requirement? (Choose Three)
Add
a weighted condition to compare the type of inquiry to existing cases.
Correct!
Test the
type of inquiry with a weighted condition, and specify a weight that exceeds
the threshold value to return cases where the type matches.
Add
a must-match condition to list only cases that match the customer name.
Add
a must-match condition to list only cases that match the type of inquiry.
Add
a weighted condition to compare the customer name to existing cases.
Correct!
Test the
customer name with a weighted condition, and specify a weight that exceeds the
threshold value to return cases where the customer name matches.
Add
a weighted condition to identify existing cases that are not resolved.
Add
a must-match condition to identify existing cases that are not resolved.
Correct!
Test the
case status with a must-match condition to eliminate resolved cases from the
duplicate case search.
Question
3
A manager
wants to use resources from two different units to process onboarding cases.
You create a __________ record to meet this requirement.
Class
group
Work
pool
Access
group
Work
group
Correct!
A work
group identifies a cross-functional team that allows resources to be shared
across units, divisions, or an organization.
Question
4
A
requirement states that if the request is less than EUR1000, the request is
routed to a Cost Center Manager. If the amount is greater than
EUR1000, the request is also routed to a Director. In addition, if the
request is for customer billable expenses, the request must be approved by an
Accounts Payable manager.
How do you configure the process to satisfy this requirement?
How do you configure the process to satisfy this requirement?
Add
a Collect Information step. Use the ToDecisionTable router.
Add
an Approve/Reject step. Set the approval flow type to Cascading and use an
authority matrix.
Add
an Approve/Reject step. Set the approval flow type to Single level
Add
an Approve/Reject step. Set the approval flow type to Cascading and use the
reporting structure.
Correct!
The
process uses a decision table that can be used for defining approvers not in
the management hierarchy.
Question
5
A
requirement states that every step in the screen flow must be executed
sequentially. Which two options do you select on each assignment shape to
configure the screen flow to meet this requirement? (Choose Two)
Enable
navigation link
Correct!
Select
this option to display the step in the navigation sequence.
Perform
post-processing when navigating away from step
Save
on last step
Only
allow navigating back to this step
Correct!
Select
this option to prevent users from skipping ahead to a later step before the
preceding steps are complete.
Question
6
A
mortgage application process includes two different subprocesses that can run
in parallel. When the two subprocesses are complete, the mortgage application
process continues.
How do you configure the mortgage application process to implement this requirement?
How do you configure the mortgage application process to implement this requirement?
Add
a Split For Each shape
Add
a Subprocess shape and select the Spinoff flow option
Add
a Split Join shape
Add
a Create Case shape
Correct!
Use the
Split Join shape to call multiple independent processes that operate in
parallel and then later rejoin.
Question
7
An
insurance company collects fees for claims that exceed a specific claim amount.
Fees and claim amount thresholds vary by location.
Select the method you use to create specialized rules so that fees are correctly processed for each location.
Select the method you use to create specialized rules so that fees are correctly processed for each location.
Specialize
by ruleset
Specialize
by property circumstance
Specialize
by class
Specialize
by multivariate circumstance
Correct!
Specialize
by multivariate circumstance when you want to specialize a rule using multiple
properties such as claim amounts and locations.
Question
8
Users
must work on the next highest-priority assignment from the workbaskets
associated with their operator ID record. This requirement must be implemented
using Get Next Work.
Which two
configuration options in the operator ID record do you use to satisfy this
requirement? (Choose Two)
Merge
workbaskets
Correct!
This
option organizes all assignments in all workbaskets into a single list.
Get
from workbaskets first
Correct!
This
option forces the Get Next Work functionality to check the workbaskets listed
on the operator ID record first, before checking the user's worklist.
Operator
is available to receive work
Use
all workbasket assignments in user's work group
Question
9
When you
configure a flow action with a preprocessing action, the system performs the
action ___________________.
each
time the user initiates the flow action
if
the flow action is the default action for the assignmen
when
the user updates the details in the assignment
when
the user enters data in the form
Correct!
At
runtime, the system applies the transform or activity to the current primary
page each time the flow action is invoked.
DATA MODEL DESIGN
Question
1
An
application displays a list of product categories. Some product categories are
common to all case types. The remaining product categories vary by case
type. How do you configure the list values?
Create
a property in the class group with a local list of common values. Specialize
the property for each case type with a local list of the unique values.
Specialize
the property for each case type. Configure each property with a local list of
appropriate values.
Create
the property in the class group. Create field value rules for the list values
in the appropriate class.
Circumstance
the property by case type. Configure each circumstance with a local list of the
appropriate list values.
Correct!
Creating
field value rules for the list values allows you to specialize the contents of
the list as appropriate while maintaining a set of common list values for all
case types.
Question
2
In which
situation do you select the Copy data from a data page option rather
than Refer to a data pageoption to populate a page?
When
you always need the most recent data
When
you need the data to be stored as part of the case
When
the property is of type pagelist
When
you use a data transform or an activity as the source for the data page
Correct!
Copy data
from a data page creates a version of those properties in the case.
UI DESIGN
Question
1
Select the UI design best practice for
supporting application usage on a mobile device.
Use
auto-generated controls.
Display
all UI elements on a form.
Use
fixed-width styling.
Configure
links for user actions.
Correct!
Auto-generated controls are cross-browser
compatible and support standard application platforms, including those for
mobile devices.
Question
2
Which element do you configure to create a
reusable text style in a skin to apply to both button labels and list entries?
A
mixin
A
layout
A
component
A
format
Correct!
A mixin is a reusable style pattern applied to
one or more formats.
REPORT DESIGN
Question
1
Which
situation requires the use of a class join?
A
list of cases that includes the create by operator and current work status
A
list of child cases categorized by the case ID of the parent case
Correct!
This
report combines information from the parent case class and the child case
class, and requires a join on the case ID of the parent case.
DATA MANAGEMENT
Question
1
You need to determine if all paths of a flow
will execute correctly. Select two rules used to simulate service calls.
(Choose Two)
SQL connector
data
transform
Correct!
A simulation data transform can be applied to
populate a data page.
data
object
data
page
Correct!
You can simulate a data page.
Question
2
One concern about integrating with external
systems is managing connection information as the application migrates
from one server to another. You address this concern using _______________.
Branches
Dynamic
Class References
Global
Resource Settings
Circumstances
Correct!
Global Resource Settings allow you to set
values for integration settings without hard coding them into your application.
Question
3
In which two use cases do you use a
Connect SQL rule? (Choose Two)
Execute
a complex SQL statement such as a join or stored procedure against an external
database.
Correct!
Use Connect SQL rules to execute a complex SQL
statement such as a join or stored procedure against an external database.
Execute
SQL statements that contain database vendor specific syntax.
Correct!
Use Connect SQL rules to execute SQL statements
that contain database vendor specific syntax.
Update
a row in a single external database table.
Execute
custom SQL statements to improve performance of queries and updates to the
PegaRULES database.
Question
4
You need to display an error message to the
user if a data page fails to retrieve data from an external system. Where do
you detect the error?
In
the response data transform
In
the activity transition condition invoking the connector
In
the post-processing activity in the data page
In
the error handling flow on the connector
Correct!
Use the
response data transform to detect errors.
APPLICATION DEBUGGING
Question
1
You need
to unit test a decision table. The table compares input properties against data
on a clipboard page. What two methods allow you to populate the clipboard page
with data before testing the decision table? (Choose Two)
Use
the Clipboard tool to write the values to the pySimulationDataPage.
Provide
the values in the Run Rule dialog.
Create
a data transform to provide values for the properties on the clipboard page.
Correct!
You can
run a data transform to populate clipboard data prior to unit testing a rule.
Open
a case with the needed data and copy the data to the clipboard for the unit
test.
Correct!
You can
copy data from an existing case to populate clipboard data prior to unit
testing a rule.
Question
2
A report
definition takes longer than expected to return results. Which two Pega tools
do you use to help identify the issue? (Choose Two)
Performance Profiler
PegaRULES
Log Analyzer (PLA)
Performance
Analyzer (PAL)
Correct!
Use PAL
to discover the elapsed times for database operations.
Database Trace
Correct!
If a
database query takes longer than expected to return a result,
Database Trace can provide information on the details of events related to
the query.
APPLICATION ADMINISTRATION
Question
1
An issue
prevents an agent activity from committing entries. You want to troubleshoot
the activity in the System Management Application (SMA) to determine
which step or steps are producing errors. Which approach do you take to locate
the issue?
Run
the requeue option for a specific agent.
Run
the Tracer tool for a specific agent.
Examine
the items in the Broken Process queue.
Review
the exception information in the list of all agents.
Correct!
Running
the Tracer tool allows you to examine the activity steps.
Question
2
What
approach do you take to simplify the process of migrating data instances from
one environment to another environment?
Save
the data instances to an application ruleset.
Associate
each data instance with an application ruleset.
In
the Application Packaging wizard, select the instances you want to include in
the Data Instances to Include step.
Use
the Include data types setting in the Product rule.
Correct!
The
system uses the associated ruleset to identify instances to include in the
archive file.
Question
3
In an
online banking application, customers are not allowed to initiate a request to
transfer funds when they have pending transfer requests in an audit stage.
Which configuration option do you use to implement this requirement?
Which configuration option do you use to implement this requirement?
Use
an Access When condition to determine if the customer has a pending transfer
request in the audit stage.
Set
an entry validation condition on the first stage in the transfer funds case
type.
Use
a privilege to determine if the customer has a pending transfer request in the
audit stage.
Configure
a Validate rule to evaluate if the user has a pending transfer request in the
audit stage.
Correct!
An Access
When rule defines a test that the system performs to allow, or disallow, a user
from performing an operation.
DECISION DESIGN
Question
1
In Pega
Decision Management, you need to calculate the margin for propositions. What
category of flow components do you use?
Business
Rule
Arbitration
Decision
Analytics
Enrichment
Correct!
Enrichment
components set values for properties that require a calculation, such as the
margin.
ReplyDeleteIt is amazing to visit your site. Thanks for sharing this information, this is useful to me...
pega cssa online training
pega cssa training
learn pega cssa
pega cssa certification course
pega cssa certification course
pega cssa certification online course
pega cssa certification online training
pega cssa certification training
pega cssa online course
Thank you for sharing the valuable information.
ReplyDeletepega robotic process automation training
pega robotic process automation course
Valuable Information!!
ReplyDeletePega Training Hyderabad
Pega Online Training
Excellent article and this helps to enhance your knowledge regarding new things. Waiting for more updates.
ReplyDeleteAngularJS Training in Chennai
Angular Training in Chennai
AngularJS Online Course
AngularJS Training in Coimbatore
Thank you for the useful information. share more updates.
ReplyDeleteCognos
Types of cognos
Great blog. Thanks for sharing such a useful information. Share more.
ReplyDeletePytest Training Online
Pytest Course Online
Nice blog, very informative content.Thanks for sharing, waiting for the next update…
ReplyDeleteThe application of Java in different sectors
What is Java?
This post is very simple to read and appreciate without leaving any details out. Great work !
ReplyDeletetelecom software development
I have read your blog. It is very attractive and impressive. I like your blog.
ReplyDeleteBest Pega Online Training
Learn Pega Online
pega real time interview questions
ReplyDeletepega interview questions for 5 years experience